SKAN HOLZ Emsland carport
The Emsland 402 x 846 cm carport combines a robust structure in a classic design with high-quality roofing and is the ideal solution for protecting vehicles, motorbikes or as a covered parking area. The stable structure made of glued laminated timber (glued laminated timber) from Nordic spruce ensures high dimensional stability and low cracking. The factory treatment in walnut preserves the natural appearance of the wood and protects against UV and moisture damage.
- Solid structure: Glued laminated timber beams ensure durability and high load-bearing capacity.
- Weather protection: Surfaces flooded with glaze twice on all sides at the factory reduce swelling and shrinkage behaviour; repair glaze for cut and assembly surfaces included.
- Exterior dimensions 402 x 846 cm: Offers sufficient space for one vehicle or two smaller vehicles / additional storage space.
- Integrated storeroom: Practical storage space for bicycles, garden tools or firewood, protected from rain and direct sunlight.
- Posts 12 x 12 cm: Robust posts including H-post anchors for secure anchoring in the foundation.
- Roof covering made of galvanised steel trapezoidal sheet: Polyester-coated in anthracite, with anti-condensation fleece on the underside to reduce dripping and impact noise.
- Wooden facing with aluminium end edge: Aesthetic detail and additional protection for the end edges.
- Including rain gutter with downpipe: Galvanised, anthracite-coated metal, installation accessories included; also available in white on request.
- Post anchoring: Including 60 cm H-post anchor made of galvanised flat steel for setting in concrete in point foundations to be created on site.
The kit is pre-treated at the factory so that you can start assembly immediately after delivery. An enclosed repair quantity of glaze enables the professional post-treatment of drilling and cutting points. For additional finishing, we recommend light sanding and a coat of high-quality glaze after installation.
Technical advantages of the roof covering:
- Corrosion protection: Galvanised trapezoidal sheet metal with polyester coating offers long-lasting protection against the weather.
- Anti-condensation fleece: Prevents dripping and reduces noise during precipitation.
- Low thermal expansion: Minimises the risk of deformation in the event of temperature fluctuations.
Installation and service: The kit is supplied including all necessary fixings and H-anchors. We will be happy to provide you with a suitable foundation plan on request - please specify when ordering. Please follow the assembly instructions for the dimensions of the point foundation and the correct installation of the rain gutter (use a suitable hand saw when shortening to avoid rust forming on the cut edges).
The Emsland carport is a durable, flexible and visually appealing solution for outdoor use. Thanks to the combination of high-quality glued laminated timber, corrosion-protected roof covering and practical features, you get a product that is highly durable and easy to maintain and assemble.
Construction
The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.
Colour treatment
The colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.
Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.
For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.
Steel roofing with an anti-condensation coating
The roofing consists of galvanised trapezoidal steel sheeting. The upper surface is finished with a polyester-based coating in anthracite, which emphasises the modern appearance and contributes to the surface’s resistance to weathering. The underside is primed and fitted with an anti-condensation fleece.
The anti-condensation fleece can absorb any moisture that accumulates on the underside of the metal and release it again after a delay. This helps to reduce the formation of dripping condensation. Furthermore, the fleece can reduce the noise perceived during rain or hail.
Trapezoidal steel sheets are characterised by their dimensionally stable structure and are suitable for outdoor use. The galvanised finish, combined with the coating, enhances the longevity of the roofing and makes it a robust solution for a variety of weather conditions.
Rain gutter
The scope of delivery includes a rain gutter made of galvanised and anthracite-coloured coated metal. The gutter is attached to the carport with sternboard brackets. The gutters are joined together using clamp connectors and the ends are sealed with caps for clamping. Pipes and bends are simply inserted into each other. If gutters or pipes need to be shortened on site, please use a hand saw suitable for steel, not an angle grinder. This will also protect the cut edge from rust.
Would you like a white gutter instead of an anthracite one? No problem. Please make a note of this in your order.
Bracing
The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.
- Flat-roof carport
- Solid structure of high quality glued laminated timber (BSH spruce)
- Colour-treated in walnut
- Steel roof panels with anti-condensation fleece
- Posts 12 x 12 cm
