Everything you need to know about proper care
Useful tips for a long service life
Find out here what you need to bear in mind and what you should look out for to ensure you can enjoy your SKAN HOLZ product for many years to come and get the most out of it at all times.
Primer: Essential protection
If your timber product has not been impregnated or pre-treated at the factory, it is absolutely essential that you apply the primer yourself. The primer provides optimum protection against insects and mould. Clean the timber surface before applying the primer.
Get your brush out – it’s time to paint
Once the primer has been applied, apply the first coat of paint. Always follow the manufacturer’s instructions. At least one further coat (even for products we have pre-treated with colour) is now required. Experience shows that renovation coats are often put off – so it’s best to apply one or two extra coats straight away.
Cleaning, maintenance and repainting
Regular maintenance and cleaning of your kit are important to ensure your structure remains in good condition and continues to give you pleasure for years to come. As a general rule, it is important to bear in mind that wood, being a natural material, can be affected by environmental factors such as sunlight, weather and moss. The good news, however, is that maintenance and refurbishment are very straightforward. If the surface begins to turn grey or is worn or damaged, refurbishment will be necessary.
A wide range of colours straight from the factory!
Before repainting
It is best to start with a hand brush and give the surfaces a quick sweep. Wash off any green growth thoroughly. Important: We strongly advise against using a high-pressure washer, as there is a risk of damaging the wood grain. Once dry, the surface should then be sanded. We recommend sandpaper with a grit of approximately 120.
The Refurbishment Coat
How often you should give your log cabin a fresh coat of paint depends, first and foremost, on its location. If it is heavily exposed to the elements, a fresh coat every two years is recommended. If your log cabin is in a more sheltered spot, a fresh coat every four years will suffice. Ultimately, however, your personal taste will also play a part: do you want the log cabin to show its age, or should it always look as good as new? Whichever approach you take, it is important to clean and sand the surface before applying each coat of paint, so that the new layer of paint adheres properly to the wood.
Special features of Douglas fir:
Douglas fir is resistant to insect and fungal attack thanks to the resins and oils contained in the wood. If Douglas fir is not treated with wood stain, a silvery-grey patina will form on the surface over time. This provides natural protection against environmental influences without the need for time-consuming wood maintenance.
Special features of the façade panels in our CrossCube series:
Just like a house façade, the façade panels require regular coats of paint to counteract the effects of the weather. Weathering, efflorescence, small cracks or moss growth – as also occur on house façades – are possible.