Gazebo Versailles, glulam, pre-treated walnut

€5,279.00

*Manufacturer’s recommended retail price. Free kerbside delivery within Germany (mainland).

Color

Natural

Light oak

Walnut

White

Slate-grey

Anthracite

Size

Ø 418 cm

Product number: 371396-03-31

Premium quality for your garden

Assembly instructions Data sheet

SKAN HOLZ Gazebo Versailles

6-corner gazebo Ø 418 cm
solid structure of high quality glued laminate (BSH spruce)
colour-treated in walnut
posts 12 x 12 cm including mounting brackets
swept roof structure
tongued post-purlin connections
gekervte rafters
28 mm roof boarding
Shingles optionally available

Construction

The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.

Colour treatment

The colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.

Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.

For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.

Roofing

The roof consists of 19 mm roof boarding. Roofing with shingles is not possible due to the low roof pitch. We recommend roofing with KSK-M roofing membrane (optionally available). The slope runs toward the rear.

Bracing

The building kit contains mounting brackets of galvanized flat steel including anchor bolts for attachment to the site-built foundation. They ensure secure connection to the subsurface.

Solid structure of glued laminate (BSH spruce)
Colour-treated in walnut
posts 12 x 12 cm
Including mounting brackets
28 mm roof boarding

Anchoring:	Mounting brackets
Base surface:	11.23 m²
Basic length:	288 cm
Basic width:	333 cm
Building volume:	31.05 m³
Color:	Walnut
Color treatment:	Stained
Garantie:	5 years according to our warranty conditions
Material:	Glulam, spruce
Material roof covering:	Roof boards
Mounting material:	Included
Not inclusiv:	Cement
Number of packages:	1
Number of posts:	6 Piece
Passage height (behind):	215 cm
Passage height (front):	215 cm
Post length:	215.8 cm
Post spacing (depth):	150 cm
Post spacing (width):	150 cm
Roof eave height:	221 cm
Roof overhang (behind):	36 cm
Roof overhang (front):	36 cm
Roof ridge height:	332 cm
Roof shape:	Tent roof
Roof slope:	to the side
Roof surface:	15 m²
Roof thickness:	28 mm
Shingles required á 2m²:	12 package(s)
Size:	Ø 418 cm
Snow load:	0.75 kN/m²
Surface wood:	64.07 m²
Thickness of posts:	12 x 12 cm
Total height (behind):	221 cm
Total height (front):	221 cm
Total length:	360 cm
Total weight:	614 kg
Total width:	418 cm
Type of installation:	Free standing
Wind pressure:	0.65 kN/m²
delivery Note:	Road that must support a 38t truck (Germany, mainland)
delivery time:	4-5 weeks
package weight 1:	614 kg
packaging height 1:	65 cm
packaging length 1:	120 cm
packaging width 1:	260 cm
roof overhang (left):	36 cm
roof overhang (right):	36 cm

Accessories

Shingles, black ( 2m² per packet )

Roof shingles for peaked roofs. These can be laid directly on the boarding or roofing felt and provide long-term protection against the elements. Please refer to the instructions of each product for the number of packages needed.Shingles, black2m² per packet2 m²

€59.00

Details

Shingles, red ( 2m² per packet )

€59.00

Details

Balustrade balcony siding 150 x 96 cm, Nancy 2/Versailles, colour pre-treated in walnut

The decorative SKAN HOLZ balustrade of balcony siding is suited to the SKAN HOLZ gazebo Nancy 2 / Versailles 2Product featuresWidth: 150 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in walnutPhoto galleryAny illustrated gazebos, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 150 cmNordic spruceColour-treated in walnut

€225.00

Details

Balustrade St.Andrew`s cross 150 x 84 cm, Nancy 2/Versailles, colour pre-treated in walnut

The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to the SKAN HOLZ gazebo Nancy 2 / Versailles 2.Product featuresWidth: 150 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 150 cmNordic spruceColour-treated in walnut

€379.00

Details